Garage Door Upgrades that Enhance your Garage Comfort

Garage door upgrades

Garage door upgrades can enhance any garage by making them a more high tech or comfortable space without spending too much money. Many people think about their garage door installation in Clearwater, FL, as only a place to park their vehicle, and perhaps someplace to store all their clutter. However, you can use your garage than just a storage room or a parking lot, and its potential is sometimes underused.

 So, knowing which garage door upgrades to use for a homeowner can help make things simpler. Now, many people will go for the most high-tech upgrades, which is fine, but the novelty of the upgrade may wear out. How about we look at many ways you can upgrade your carport?

Add a Smart Garage Door Opener

smart garage door opener repair

You may find things high-tech in today’s market, which makes life simpler. The smart garage door opener is a great high-tech product. You can open and close the garage door opener remotely, yet the opener can close the door alone if you’ve forgotten to close it while in a hurry.

You can program the smart garage door opener to send you notifications each time the door opens and closes. Therefore, you can remotely monitor when someone has entered or left the home.

New garage door upgrade keypad access

Keypad access is outstanding amongst garage door upgrades for added security. It helps if you lose your keys to the home. The best thing about modern keypads is their rolling passcodes features with light that help improve a home’s security. Also, if you experience a lockout, it is possible to enter through the carport if you remember the passcode.

Put resources into insulation

Heating and cooling expenses can add up, particularly if you have a garage. Though carports can open and shut, they still allow air in, which changes the temperature of the garage. When you have an attached carport to your home, it can impact the temperature inside the home.

An insulated garage door will conserve energy, keep your carport warmer during winter, less possible to come out of alignment, and quieter than a door without insulation.

Even if you insulate your garage door, there are other issues you may face with an attached carport to your home. If your garage has concrete walls, cold air can transfer to your carport and home.

Insulating the ceiling and walls of the carport will help stop the fluctuation of temperatures in your home, bringing down the energy bill, even when the temperature changes inside your carport.

Upgrade to High Cycle Count Springs

Garage door spring maintenance

One of the most significant features for added life span is your door springs. Specifically, look at the cycle count on your springs.

Usually, when your current springs don’t have a high cycle count, they won’t last as long. Every time you open and close your door, it counts as one cycle.

They rate cheap garage door springs at around 10,000 cycles. This means springs will last you around 7 years. However, climate and temperature changes can affect this by up to half. That is little time before your spring breaks and you need another one.

Instead, pick or install a high-cycle spring, for example, 20,000 cycles that can last from 14 to 20 years. A good guideline to follow: if your door opens multiple times each day, invest in high cycle springs since it will save you cash in the long-term.

Photoelectric Sensors

Old garage doors, for example, manufactured before 1994, will not have a photoelectric safety sensor. The sensors are a valuable feature or upgrade that garage door need for safety concerns. These sensors keep the door from shutting when there is an object or person or child in its way.

Upgrade your garage door itself

New garage door upgrades enhances the homes curb appeal

The first thing people see while visiting your home is your garage door, so it’s critical that it provides curb appeal. You can’t finish your upgrade if you still have an old garage door particularly one that needs maintenance. By upgrading to a new garage door, you can instantly transform the home’s curb appeal.

Some new garage doors even bring insulation, which will save you cash on your energy bills. These doors also make for better security, making it more difficult for burglars to get in. It’s much easier to bypass an old, troubleshooting, or broken garage door.

In conclusion, with modern garage door upgrades you will save time and cash by requiring essentially less maintenance than an older model would need.


Garage door upgrades aren’t something that you have to invest if you have the most modern garage door with all the features mentioned above. Remember when you purchase a new garage door to hire the right team to install it.

If you don’t know where to start, consider calling an expert garage door service like Sure Fix Garage Door Repair to offer you guidance. The specialists may likewise assist you with finding the right garage door for your way of life.

This site is using SEO Baclinks plugin created by Cocktail Family

Garage Door Opener Installation and Future Technology

garage door opener installation

Garage door opener installation projects have made a few homeowners anxious about the installation process. You probably lose sleep thinking about the future of your garage door, too. However, don’t worry, that is our job! But you can have fun thinking about it instead of worrying.

Since a garage door opener installation and technology go well together, we have to talk about both. Yes, the garage is keeping up with the technological advances moving into the new high-tech home. Garage door openers began as a straightforward system for opening and shutting the door. But they are quickly evolving into the integrating of electronic devices that predict and respond to our household needs.

It is difficult to predict what the future of the garage will be. Nevertheless, we can say the future is already here with many garage door technology already accessible and others that I will discuss below.

A quick history of garage door development

LiftMaster garage door opener installation

Garage door opener installation, and the doors, saw many changes in design and development during the last ten years. One of the main innovative advances introduced in 1993 was the photo eye sensors and door reversing mechanism that protect people and pets from getting caught under a shutting door. Not long after, remote-control openers, back-up battery systems, and sturdier springs, rollers, and tracks also became available.

Garage doors began as huge, rigid panels which opened as one unit by swinging outward, then up. These garage doors are more difficult to lift manually during an emergency and more dangerous if they lose control. Today, most garage doors arrive with horizontal sectional panels tied with hinges. These modern doors take less energy to lift and safer besides simpler to install.

The garage space has also developed from being a utilitarian space for keeping the vehicle out of the weather to the main access to the home in many households. As vehicles become less vulnerable to the sun rays and rain, the garage keeps on advancing into a multi-purpose space for households uses for example, from the laundry room to an office or workshop with air conditioning.

MYQ Garage door opener installation and Ryobi add-ons

MYQ Garage door opener installation

New garage door innovation will usually revolve on the internet of things. The Internet of Things comprises ordinary items that work with the internet. Think coffee makers, thermostats, smart locks, and, now, garage doors. You can control some advanced garage door openers with a smartphone or tablet application. These openers can make your garage increasingly efficient and secure.

The MyQ garage door opener gives people a great deal of convenience. It works with an application that lets you control your door from anyplace. Monitoring features tracking for when people get in or out of your garage. You can set a schedule that opens and closes the door at specific times of the day. For a real smart home experience, you can connect it with different devices like the Nest thermostat.

Now, the Ryobi opener uses add-on devices to improve your carport. You can attach various modules to it, for example, a Bluetooth speaker, park-assistant laser or tire inflator. The Ryobi system allows you to synchronize these devices for a connected garage.

The future of the garage door

The garage doors have many bright future possibilities in the next ten years. With innovation advancing quickly, ten years gives manufacturers a lot of time to improve in ways we could never imagine. However, we do have ideas springing up in the present that we could use for the garage doors of tomorrow.

The chances that we see a solar garage door are high. Many homeowners today place solar panels on their rooftops to generate clean energy. Value, appearance, and mechanics impede making solar garage doors a reality. Nevertheless, in ten years, we could have them or a little less.

Also, we have the early stages of tech that could let us change our garage door appearances whenever we want. They’re trying to make garage doors from an interactive glass. Corning is developing a glass that works like a computer screen. With the touch of a button, you could give your garage door a new look.

What Are Garage Doors Going to Be Like in a Decade?

garage door opener

Because of our garage door visualizers on interactive websites, you can already see how many items look on your home, today. We might not have solar panels on garages or interactive glass options but, it’s never too early to look ahead.

This site is using SEO Baclinks plugin created by Cocktail Family

New Garage Door Installation Hints for Choosing the Right Garage Door

Blue new garage door installation on a house

Regarding a new garage door installation, many people know they need one, or want a different one or thinking of getting something new. However, when the time comes to picking the right one, it is difficult to decide.

Regardless if it is picking the type of garage door, the color, the style, and even the handles and locks, the decisions nowadays can cause headaches. Today, top garage door makers are distributing many styles and colors, along with the many types of garage door openers available.

Do you need an automatic door, a side-hinged door or a garage door color that doesn’t even exist, picking your new garage door installation can be difficult for even the sanest customers?

However, what if you had a way of seeing with your own eyes and looking and touching the features discussed above? Well, you can now by visiting a garage door showroom.

What is a garage door showroom?

Two white new garage door installation on brick house

When you get a few brochures or have a salesperson visit you to take you through all the choices on their garage doors, it still can be difficult to purchase the right one. Why, because salespeople paint the perfect picture with no solid evidence. It’s almost impossible to tell someone how a garage door looks and feels and much difficult to see how it opens. Plus, how it fits into your home, regardless of how great the business salesperson is during the meeting. Trying to imagine how everything fits and how it will look can be unimaginable.

If you were purchasing a new vehicle, you would visit a car sales showroom. When you purchase your house, you saw it before you got it. Therefore, regarding garage doors, wouldn’t it be incredible if you could do the same, to take a quick trip and see it. Yes, garage door showrooms show you all the garage doors allowing for the visualization to kick in but for real this time.

The advantages of going to a garage door showroom

So, yes visiting a local garage door showroom is an absolute necessity if this choice is available to you. You can meet the company and the people who will deliver your new garage door. But you can spend some time looking around, seeing the many available colors and at the various styles. Besides, understanding the difference between an up and over garage door and a side-hinged garage door.

Visiting a garage door showroom allows you to see the many doors available that can match your home. For example, the ones that can work and might not work, you would then focus on the most suitable alternatives, instead of trying to look at everything. After you pick the right garage door, then look at the details like style, material, colors, and insulation. You may expect to pay a significant amount for an automatic garage door, but when you see it in person, you might not care and explore further.


Nothing beats picking the right garage door in person. Knowing your options is a significant part of the garage door buying. You have the option to see them across the board with a cup of coffee in your hand, which can make the choice a lot simpler.

New Garage door installation experts

Sure Fix Garage Door Repair and Installation

After deciding on the right garage door you have to find the new garage door installation expert for the job. Remember, this is not a DIY gig since you can get injured or make a mistake that may cause you a lot of money losses.

Usually, the garage door showroom can do the installation for you. However, if you feel that they’re not adequate or want someone else for the job then contact Sure Fix Garage Door Repair. We can install any type of garage either commercial or residential while leaving it in smooth operations and clean. Trust us, you will keep your warranty and save some money too.

This site is using SEO Baclinks plugin created by Cocktail Family

Why are Garage Door Sensors Installation a Need for Home Safety?

Garage door replacement

A garage door sensors installation is a necessary part of your automatic garage door opener plus critical to home safety. Often, you click on your remote’s opener and the door doesn’t completely open or close. Chances are garage door sensors that have detected an object or person in its way.

It is fundamental for preventing damage to the door, the opener, and the thing or person in the path of the entryway. Regrettably, regardless of how well these garage door safety sensors work, there could be issues or failures since it’s a machine. And can leave you frustrated when you can’t close your entryway or worse for the safety problems I will discuss below.

What are garage door sensors?

Align Garage Door Sensors Installation
Creative Commons
Uploaded by: Wikivisual

Garage door sensors are situated in the bottom corners of your door, typically connected to the rail. On one side there will be a receiver and on the other side a sending unit. They communicate using infrared lights. The sending unit operates as a flashlight, and the receiving sensor works like an electronic eyeball.

The sensors make an invisible (to people) and intangible (you can’t contact or feel it) tripwire that will advise the motor to stop if there is an obstruction. When this occurs, the door will reverse and the main lights will turn on and off a few times as a warning that something is in the way of the door. The door can open, but won’t close when something is blocking the sensors from seeing one another.

Common garage door sensors issues

The most common issue is nearby storage, or nearby things obstructing the sensor. Nearly everyone has a few items stored or left unintentionally next to the track, in the corner of the garage. You know the typical offenders – shovels, brooms, ladder, football or soccer ball, and possibly your bicycle.

All these things can block a sensor and although they may not impede the door shutting, it can stop the door if the receiving sensor can’t see the sending unit. Fixing this is straightforward, keep everything about 6 inches away from the garage door.

Misalignment issues

Sure Fix Garage Door Repair-Aligning-Garage-Door-Sensors

The following issue to look for is a misalignment of the garage door safety sensors. This means the two sensors are not aiming at one another effectively. This happens more easily than you may think. If you have a trash bin close to the door you may accidentally hit a sensor with it when taking out the trash. When you have a little garage or full of things, it’s straightforward to accidentally kick or knock one of the sensors when walking by. Sometimes a child or a pet will play with a sensor and move it. Other times, they simply loosen after some time and gravity pull them down.

No matter the reason why they moved, ensure the garage door sensors are pointing directly at one another. Every sensor has a little LED light. The sending unit will always be lit, yet the receiving sensor will stay lit if it can see the sending unit. Thus, if you see one light on and the other off, you have an issue! Loosen the sensor, and aim it as well as you can to ensure connectivity. It should be parallel to the floor and pointed directly at the sensor on the other side of the door. Ensure that once you have it aimed well you tighten it. You would prefer not to realign it again!

Water, dirt, and spider webs Oh My!

Another thing to remember is spider webs. They typically can’t obstruct the sensor, but trash or leaves blowing around can get trapped in the spider webs, and these will block your sensor! Therefore, always keep the bottom weather seal, the floor and the tracks away from dirt, foliage, and spider webs.

Like most electronics, water isn’t good for garage door sensors. If you have water leaks, or you wash your vehicle close to the garage with the door open, ensure to keep the hose pointed the other way! Also, if your sensors appear to be aligned and nothing seems in the path, investigate the wires going off to the sensors. Occasionally, the wires can get corroded and can make them malfunction as well.


House- garage door photo eyes installation

For all of the advantages, garage doors give homeowners garages can be hazardous if the sensors don’t work correctly. According to the US Consumer Product Safety Commission, there are around 30,000 injuries a year caused garage doors. Yes, I understand many of these incidents rely on the individuals. However, to exacerbate the situation, many of these injuries were to children.

While many garage door sensors are standard, you can likewise get a garage door sensors installation done by professionals. Ensure to have a garage door sensors installation worked by experts since they’re sensitive, and when installed incorrectly may cause malfunctions with catastrophic events.

This site is using SEO Baclinks plugin created by Cocktail Family

Garage Door Insulation Installation Tips

garage door insulation installation tips

Garage door insulation installation can make your life a lot comfortable, warmer, and quieter. It lowers energy bills, acts as a barrier to lower street noise, and enhances a dull space.

Usually, many people use their garage door as the primary doorway to their home instead of the front door. This results in a garage door opening and shutting many times throughout the year.

During colder months it means it will allow frigid air to enter, and in the hot months, more heat to enter. The best approach to fight extreme climate in the winter is to insulate your garage, keeping it pleasant and warm in winter and cool in the summer, adding more protection can save you cash on your energy bills.

Your garage door insulation installation in Clearwater, FL, is significant to ensure a more comfortable, usable space.

How to keep your garage warm in the winter?

Yes, you can add space heaters in the winter or portable fans in the summer to regulate warm or cool your garage. However, insulation is the best way to keep your garage cool in summer and warm in winter. Insulation helps regulate your garage temperature since it lowers air loss and keeps air from getting in. Because most garages are the worst at energy efficiency, insulation is vital.

When you control your carport’s temperature using insulation, you will also keep energy costs down as you lower the amount of energy needed to heat up or cool down the rest of your home.

Garage Door Insulation Installation Kits

garage door insulation installation kits lower energy bills

Insulation the garage door with insulation kits since it makes your garage door sturdier. The insulation reinforces the entryway and makes it less susceptible to dents from accidentally hitting it or damaged by the climate.

Insulation kits additionally reduce noise from opening and shutting your garage door and decrease any noise from outside your entryway. Insulation permits you to use your carport for your favorite hobbies or jobs, making it a comfortable environment regardless of the climate. When you search for an insulation kit, look for one with a high R-value.


R-value measures how effective a material is at insulating dependent on its chemical properties and thickness.

The higher the R-value, the better the insulation. However, regarding R-values for garage doors, experts often use different methods. This makes it difficult to make sense of what R-value you essentially need to insulate your garage door. So it’s best if you call an expert for assistance to find the correct insulation kit for you.

Moreover, insulation kits require careful precision to cut the insulation to accommodate your garage door panels superbly before securing them on. To ensure that your insulation kit works the right way for instance, and stay warm in the cold and cool in the high temps, contact an expert to install your garage door insulation.

Why keep the garage warm in the winter?

If you want to only use your garage for storage, freezing winter temperatures can penetrate your garage and affect your things, for example, your vehicle. Colder temperatures can ruin your vehicle’s battery, thicken its liquids, cause low tire air pressure and lead to undependable wiring and spark plugs.

Besides, if you often work or do any recreational activities in your carport, it should be habitable, and freezing temps can rapidly make it intolerable. Garages act as a shield as far as the temperature goes from the outside to inside your home.

Garage Door Weather Stripping

garage door insulation winter tips

To find the most ideal approach to heat your garage during winter, start by giving your garage a nice cleaning. How can you add improvements if it’s a mess? After you organize and tidy it up, inspect your entryway and take a look at your weather stripping. After a time, your weather stripping could crack and break, and if water finds its way in, it can freeze and make your garage door stuck, incapable to open.

Also, broken weather stripping prompts some serious air leaks which permit the cold winter air to come inside. To replace your weather stripping, remove the current weather stripping and scrape off any remaining sealant. Remember, not all doors have a sealant that needs removing, particularly doors that were installed about 20 years ago. 

To put on your new weather stripping, you should precisely measure it and line it up to the door to guarantee you tightly seal it. Close the garage door and set the stripping down so the rubber flap is pressed against the entryway.For more information and assistance for a garage door insulation installation please contact us today.

This site is using SEO Baclinks plugin created by Cocktail Family

Five Signs to Call an Expert Garage Door Repair Company

Call an expert garage door repair company

Do you think it’s time to call a garage door repair company, odds are it is? Every year, many people are severely injured by garage doors. Because of the tension that garage doors are under and their weight they can hurt people or pets while damaging your car too. 

When you are experiencing any of the issues below, or feel that something isn’t right with your garage door, it’s critical to contact a garage door repair in Clearwater specialists right away.

Rising energy bills

One issue many residents see during summer is an increase in their energy bills. Poorly insulated old garage doors and with climate wearing away the finish, your current door may do little to keep the outside temperatures under control.

If you don’t properly insulate your garage door, gaps along the perimeter can permit untreated air to flow freely into the carport, affecting the comfort and energy bills of your home. Our team can inspect your door and offer advice and repair, regardless if that includes minor garage door fixes or a full replacement.

Out of date safety features

Garage door sensors

If the safety features for your garage doors are obsolete, it is imperative to get a technician out immediately to address the issue. Motion detection, manual controls, auto-reverse, photo eyes, and other safety features are standard.

Also, in some states, you require having a battery backup system installed to protect in case of wildfires.

Experiencing excessive shakiness, vibrations, and making unusual noises

Other issues that prompt a call to a garage door repair company are vibrations or extreme shakiness in your garage door. This is a sign that there is a loose hinge or a problem with your rollers. Both are dangerous scenarios so call an expert right away.

If your garage door makes weird noises, it is also time to get it checked. While garage doors aren’t noiseless, they should make boisterous shrieking noises out of nowhere. The garage door can have many issues behind the loud noises so it’s critical to summon an expert right away.

You notice wear or rust on the garage door parts

If you notice the wear or rust on your garage door it’s also a sign that you should contact a garage door repair company. Old, worn, or broken parts, loose screws, and wear on different components can make a hazardous scenario so make sure to maintain then right away.

Sagging or malfunctioning garage door

Garage door repair company installation in Clearwater

You may see that your garage door looks marginally off-kilter, so now could be an ideal time for a garage door repair. After much time, many aging doors sag, but when left unfixed, this sagging can affect the balance of the door itself. As a heavy, mobile appliance, your garage door can cause a ton of wear on parts when things don’t get a properly balanced. Your springs, for instance, may wear unevenly if it leaves one side to finish all the work.

If you’ve seen that your door doesn’t look even or it isn’t shutting evenly, a straightforward test can determine the required balancing. Turn your opener, disengage your entryway with the red release handle, and physically move it to the midpoint. If the garage door rapidly goes up or down instead of hovering, it is unbalanced and needing fixes.

Contact the right garage door repair company!

Chamberlain opener installation by Sure Fix Garage Door Repair

If you are experiencing issues with your garage door, it is straightforward to fix right away. Remember, every year many people get injured by garage doors or by improper operations. That’s why please get any issues quickly fixed by an expert garage door repair company like Sure Fix Garage Door Repair.

Regardless of your garage door is making odd noises, needs updates, isn’t working as it should or you notice wear or rust, contact an expert, yes you guessed it, right away.

This site is using SEO Baclinks plugin created by Cocktail Family

Top Reasons Why My Garage Door Won’t Close Correctly?

New garage door springs installation

A garage door often appears to have their own issues, frequently deciding when and how far they want to close or open. Often, the garage door repair in Clearwater can be a simple change of the batteries in the opener, and other times a bumbling door can show a significant issue.

The fix, for example, replacing springs or changing the track, needs a professional fix. However, there are many troubleshooting techniques you can do alone before counseling a specialist. Let’s see some ways you can deal with regular garage door issues to keep your home safe and secure.

Garage door photo eye straightforward issues

Garage door photo eyes cleaning the lens with a cloth

Clutter or obstructions that block the garage door sensor are the main issues to look for if your door won’t close. Or, in extreme cases, open in the least. First, check the sensor lights. Depending on the brand and model of garage door you purchased, one of the sensor lights may flash, dim, or go out when the beam interfered.

Regardless if something is in the way, consider giving the photo eye sensors a decent cleaning. Sometimes dirt, debris, or even spider webs can interrupt the beam and prevent the entryway from working. If the door despite all your effort won’t stay shut, check that the sensors line up with each other. If they aren’t aligned, gently bend them to restore a clear connection.

You have a malfunctioning Garage Door Opener

garage door opener repair

If you’re working your opener inside the range of your garage door, but the door doesn’t react, it’s time to investigate your opener. First, confirm that the unit contains operational batteries. If new batteries don’t fix the issue, the antenna on your opener motor might be damaged or obstructed from the signal.

Ensure the antenna hangs down so it can determine the sign from your remote. When in doubt, it’s a great opportunity to get in touch with us for a garage door opener fix or recalibration?

The Limiter Needs Recalibration

A garage door limiter controls the up and down motion of the door, along with its movement speed. If the settings are not precise, the entryway will close, hit the ground, and reverse upward since the system sees a collision with an obstacle.

To reset the limiter, find the limit switch adjustment dial. When the door doesn’t close completely, adjust the limiter down but if it doesn’t open completely, adjust the dial-up. Remember: you must make small, increment change to prevent over adjusting the entryway and making it slam open or close.

Misaligned rollers in the garage door track

When something has caused the rollers in your garage door track to become misaligned, the door could drift, become stuck, or not move at all. Misaligned rollers and tracks can likewise cause grinding or shaking sounds during door functions.

If you’ve heard odd noises while trying to close your entryway, a garage door track issue is likely your problem.

Fix the issue on the track by first cleaning the metal rollers with a toothbrush to remove any dirt or grime. Then, afterward, lubricate up them with a non-silicon-based item. However, if your door has nylon rollers, lubricate only the bearings.

Next, clean the tracks with a fabric and brake oil, removing any buildup that stopping the entryway from working properly. When the tracks are bent or damaged, they could need a replacement.

Call a professional

Sure Fix Garage Door Repair experts always with you

When nothing works, call a garage door professional. Many things can cause issues that you can’t fix on your own like a garage door spring repair. An expert can help with any binding issues, or if your garage door needs a tune-up.

Remember that openers only work as well as the garage door alone. If the door won’t lift manually, then the opener won’t do the job either.

As garage doors lead straight into our homes, its stressful situation when your garage door won’t close! We trust you have a superior understanding of what’s going on when you experience a stuck entryway.

And, how you can deal with the issue without spending on needless maintenance. If the problem causes a significant security issue, call a garage door expert right of way.

This site is using SEO Baclinks plugin created by Cocktail Family

Garage Door Photo Eyes Troubleshooting Techniques

garage door photo eyes

Garage door photo eyes issues are straightforward to notice, as you’ll see that your garage door won’t close even when there’s nothing in the way.

Also, the door auto reverses and opens every time you attempt to close it. Luckily, these issues aren’t troublesome to fix. It’s essential to have your photo eyes working correctly for many reasons including safety.

Here are the ways to fix garage door eye sensors in a few steps.

Check if the garage door photo eyes are the issue

First, ensure that the garage door photo eyes are experiencing the issues. Often, the door won’t shut because it’s stuck in the tracks. It happens when there’s a dent or bent in the track, preventing it from moving. Also, you may have a bent track if the door squeaks when you open and close it. This issue is easy to fix, so check for it first.

You’ll know the photo eyes aren’t operating correctly if the door won’t shut when you attempt to close it. You may likewise find that the door makes a clicking sound, or theirs a flashing light on the opener. Thus, it’s an ideal time to troubleshoot.

Check for obstructions

Garage door sensors obstructions-boxes

When garage door photo eyes work correctly, you’ll see that any obstructions in the door path will prevent it from shutting. You’ll probably think that an obstruction means a vehicle left halfway in the garage, or someone stands in the way. However, another thing could break the invisible beam and prevent the door from shutting.

The photo eye sensors are sensitive, so investigate and check whether anything is sitting close to the door. Boxes and other things stored close to the entryway could interfere with the beam. Keep them away from the door and attempt the door once more, to check whether that solves the problem.

Check for lights

Each garage door photo eye needs to have a little LED light on it. It means the sensor works as it should. So, check your sensors for a light that is on, off, or flickering. These signs mean that the sensor has been bumped out of place. It is straightforward to bump the sensors out of place, for example, walking into your garage, or bringing things inside.

Attempt to move the sensors a little on its mounting to make the light come back on once more. Often, you’ll see that this slight change makes the photo eye sensors work again.

Clean your garage door photo eyes

Garage door photo eyes cleaning the lens with a cloth Creative Commons Wikivisual

The simple explanation your photo eye sensors don’t work could be that they’re dirty. Since they’re positioned so close to the ground, it’s simple for them to get covered in dirt and dust. This is true if the climate is wet and you’re driving past them to park the vehicle in the carport.

Check the sensors, to check whether they need cleaning. If they do, all you need is a soft fabric to wipe away the accumulated dirt and dust on the lens. When you’ve done this, attempt at closing the door again to check if the issue got solved.

Move the bracket

Your garage door photo eyes connect to a pivot bracket, which may have been moved thus braking the invisible beam. It’s simple to fix this issue. You can free the bolts that secure the brackets to the door frame and try moving it around a bit.

Move it side to side or up and down and see if the LED light turns back on. When it does, secure it once again into the right spot and try the door again.

Realign your sensors

Aligning garage door sensors Creative Commons Wikivisual

Your sensors must be perfectly in line with one another to work correctly. If they’re not exactly in the same place, then the light beam got interfere, simulating something in the entryway that needs protection. Check for misaligned sensors and readjust them.

To test the alignment, tie a long string between the two photo eye sensors. Use a spirit level to check whether the string is level. If the alignment is off, then you know that the sensors need adjustment. Free one sensor and move it until the string is level. Then, you can loosen the string and test the entryway.

Check the wires

Lastly, check the wires that lead to the sensors. Maybe some issues are preventing the sensors from working properly. If the wires have become tangled on something, free them carefully.

When you see issues, for example, fraying, don’t fix them yourself. Issues like this are best left to a garage door opener expert. Always call an expert to assist you with finding a solution to a significant garage door photo sensor issue.

This site is using SEO Baclinks plugin created by Cocktail Family

Garage Door Maintenance Guide to a Basic Tune-up

Garage Door Maintenance Guide to a Basic Tune-up

A garage door maintenance routine is frequently ignored, but an inspection and maintenance need to be a part of your schedule. Maybe no other part of your home experiences as much wear and tear as your garage door. The normal garage door will operate more than a thousand times each year. When maintained in great working control, it gives convenience, safety, and security.

However, an ignored door can become loud and pose a noteworthy danger to your family, particularly your small children and pets. This means you will have to Google garage door maintenance near me for services in Clearwater, FL.

Don’t worry, we’ll show the steps involved with the yearly inspection and upkeep of your automatic garage door for dependable, quiet operation and safety. Many of these tips can also work on garage doors that don’t have an automatic opener.


Inspect your door’s equipment for simple garage door maintenance


Garage door maintenance near me

Tighten the bolts and nut– Because your entryway moves more than a thousand times a year, the equipment can loosen. Inspect and tighten all roller brackets and the bolts that hold the rails to the support brackets.

Check the rollers for wear- Nylon rollers can crack or chip when they weaken, so you can find defects very easily. On steel rollers, the bearing wear and the wheel starts to tilt. Purchase replacement rollers and install them by removing and reinstalling the roller bracket. However, do not remove the bottom roller bracket since the cable connected to it is under extraordinary tension.

Inspect the lift cable for wear-Look for broken strands. Damage most likely happens where the cable connects to the bottom roller bracket, where it’s exposed to moisture. Clean up the gunk from this area with an old toothbrush so you can check the condition of the cable. Since this cable is under high tension, don’t attempt to replace it yourself. Call Sure Fix Garage Door Repair to replace it.


Maintain the springs, chains, and seals correctly


Garage door spring maintenance 1

Lubricate the chain or the screw on your opener every year with white lithium grease. Spray- on models are accessible at most hardware stores. Lubrication will make the openers functioning smoother, quieter and lengthen the life of both chain and opener.

Coat the torsion springs or the extension springs mounted above roller tracks with a lubricant/cleaner like WD-40. Don’t wipe off the excess. All springs will break on because of metal fatigue or corrosion, but this yearly upkeep will prevent corrosion.

An expert should replace the springs and if one spring breaks, please replace both.


Replace the weather seal


Replace the old weather seal on the bottom of your garage door if it’s weak and worn. On wood doors, remove the seal with a level pry bar. Mount the new seal with the wide-angle of the flange to the inside of the door.

Use 1 inch galvanized roofing nails to attach one end of the seal, then pull it across the garage door and nail the other end. After, nail a couple of nails in the middle. This procedure will help you with keeping the seal aligned as your nailing every 4 inches.


Steps to a more secure door


Garage door repair alignment issue

Test the balance of your entryway. A well-balanced garage door is less prone to crush a person, pet or thing while also preventing the opener from overworking. To balance the garage door, first, disengage the opener from the door by pulling the opener release handle. After, bring down the door about midway.

A well-balanced door will hold the midway position without help. When the door goes back up, the springs are under too much tension. If it falls, the tension should be increased. Adjusting the spring tension is precarious and hazardous so instead call a garage door expert to perform the service!

Test the auto-reverse feature by placing a 2-by-4 wood flat on the floor and under the path of the door. When the door doesn’t reverse when it hits the 2-by-4, you must adjust the opener. Most openers have a closing-force adjustment screw on the motor housing. However, if your opener doesn’t have an auto-reverse feature, purchase another opener.


Install lift handles


Install a lift handle on both sides of the entryway. Ensure the handle will clear the highest point of the door frame, or the door may require adjustment. When there’s a handle, you’re less inclined to pull down on the spaces between sections, a habit that causes many crushed fingers each year.


Bolt the cable to the bracket


Mount an extension spring containment cable on extension spring doors by bolting one end to the bracket at the front of the upper rail.


Feed the cable through the spring


Feed the cable through the extension spring and bolt the opposite end to the upper support bracket. Make one full loop of the cable around the bolt and lock it with a fender washer and a locknut.

This site is using SEO Baclinks plugin created by Cocktail Family

LiftMaster Garage Door Openers Troubleshooting Hints

LiftMaster garage door opener installation

LiftMaster garage door openers have issues and some of these models have their own quirks. Since garage door repair experts know openers have a lot of smaller processes, it’s difficult to address all issues from multiple manufacturers all at once.

Our homeowners in Clearwater, FL, who have LiftMaster garage door openers have spoken and our experts replied! Look below at three of the most popular LiftMaster openers troubleshooting issues that our client’s experience and our top ways to deal with them, besides our top recommended opener.

Beeping LiftMaster Garage Door Openers

Smart LiftMaster garage door openers

LiftMaster openers that have a battery backup or connect with Wi-Fi will beep to tell you about an issue or to confirm that a process step has been accomplished effectively.

When your garage door has a battery backup, there are a few potentials beep situations:

  • Beeping and orange LED display means the unit is using battery power. Check if you have restored power in your home? Test the outlet to ensure.
  • Beeping every 30-second intervals with an LED display that is flickering orange means a low battery. Check whether the outlet will provide power when connected to a different gadget. If so, replace the battery.
  • Beeping at regular 30 seconds intervals with a steady red LED display means a dead battery that needs replacement.
  • Beeping every 30 seconds with a steady red LED display means a dead battery needs replacement.

If you have a Wi-Fi enable garage door, most beeps you hear will relate with the opener’s status in connecting with the network:

  1. Three slow beeps mean that the opener is connecting with Wi-Fi.
  2. Six fast beeps imply that the opener has failed to connect with the server.
  3. You will hear two beeps when the opener tries to connect with the MyQ server.

Liftmaster garage door opener lights flash, but the door doesn’t close

Your LiftMaster opener features two safety mechanisms that could prevent the entryway from opening or cause the opener lights to flash.

  1. Check if the lock button hasn’t activated on the main door control. When on, this feature will lockout requests from all remotes and restrict operations to the main door keypad.
  2. When you haven’t activated the lock button, your garage door safety eyes or photo-eyes are perhaps obstructed or misaligned. The garage doors phot-eyes ensures that the door closes when the opening is clear.
  3. When your entryway descends, hits the floor, and reverses your safety eyes could be the culprit.

Liftmaster garage door opener light won’t turn off

LiftMaster openers troubleshooting

LiftMaster openers come equipped with at least one light whose function is wired into the opener. The manufacture defaulted the lighting to stay lit for 4.5 minutes and to turn off automatically. There are many ways to check whether you need to change lighting settings or there’s a wiring issue:

  • Ensure that the light button on your Multi-Function door control hasn’t activated inadvertently. Press and release the button again to turn it off.
  • Have you walked backed and forth in the carport? Often, the safety sensors get crossed and, therefore the garage door light stays on.
  • Also, check the motion-detection feature on your owner’s manual and follow the steps to deactivate this upgrade.
  • Your owner’s manual will tell you how to reset the light timer-off feature. You can reset it as short as 1.5 minutes after activation.

Recommended chain-driven opener: Liftmaster 8365

LiftMaster garage door openers -8365W-267_hero_1

The LiftMaster 8365 1/2 Horsepower, chain-driven garage door opener, is a leading model opener offered by LiftMaster. It brings many industry-leading innovations that have made chain-driven openers quieter while keeping their durability.

Also, it brings a top connectivity feature as the MyQ technology system, which enables you to have complete control over your opener. Even if you are sitting at home or sitting at the beach on vacation, you will have control. Use the MyQ application on your smartphone, you can open your entryway and control your garage lighting from anyplace when your opener is connected via Internet Gateway. You can get emails and texts telling you the status of your garage door, letting you travel with ease.

The opener also brings a standby mode that consumes 75% less power, helping your utility bills. To improve the security of your home, the model likewise includes Security+ 2.0™, which changes the code used by your garage door remote with each click. With this improvement, burglars can’t take your code and open your door when you aren’t at home. Besides, safety beams and audio and visual alarms help ensure that your carport remains accident- free.

Trust your LiftMaster garage door opener repair to the experts

new-home with three garage doors

A garage door opener is significant to any garage door. The LiftMaster opener isn’t solely responsible for all the lifting of your heavy door because the springs help too.

However, the opener fills in as its control mechanism for opening and closing and therefore, gives extra security to your home and carport. A garage door opener is a complex system and motorized that can be connected with a switch on the wall or worked with remote control.

What LiftMaster drive system will you use?

LiftMaster openers can come with different types of drive systems such as a chain drive, screw drive, or belt drive. Chain drives (a long chain pulls the door open and shut) are the most affordable, yet they’re noisy. Screw drives (a long threaded rod drives a mechanism that opens and closes the door) are priced in the middle.

Screw drives require the least maintenance but aren’t as calm as belt drives. Belt drives (a rubber belt opens and closes the door) are the calmest, making them the most ideal decision when you have living space over the carport. However, belt drives cost the most.

 Pick the correct HP garage door opener

smart garage door opener repair

Often, a broken opener or faulty LiftMaster opener failure is because of the lack of HP. If you can’t fix your opener consider purchasing a one with a 1/3 HP or 1/2 HP for a single garage door.

Go with 1/2 HP for a double door and 3/4 HP for a heavy door made of wood or faux wood overlay. Openers have a set opening speed, so mounting an opener with a higher HP won’t open your door any quicker.

Sure Fix Garage Door Repair-You deserve our A+ service

When you call us, we will immediately send our team of professionals to investigate your LiftMaster garage door opener issue. Our experts are qualified and trained to analyze any difficulty that affects your garage door. If we find the garage door opener issue, we will offer you a cost-effective recommendation for a fast solution.

Whatever the garage door opener issue you have, our experts will find the right solution. You deserve the best help at the most affordable garage door opener service price.

Usually, fixing a faulty Lift Master opener isn’t a job for a beginner. It’s a complex component that requires master servicing. That is the reason we offer you our A+ garage door opener service in Clearwater to fix your broken opener in a matter of minutes.

This site is using SEO Baclinks plugin created by Cocktail Family