It’s a frustrating situation when your garage door opener stops working as it’s not clear the problem. However, it can be simple to find the answers to these problems. Well, with a little knowledge of course.
Nevertheless, there are many repairs available to assist you with a few of the common issues your garage door opener may have. We can help you to fix a number of these issues, but if it’s too much or you lack the tools or knowledge, then our garage door repair in Clearwater service experts will be happy to come by and help. Please have a look below to find the issues with their solutions.
The garage door does not close completely
Sometimes you will not have any issues with door opening all the way. However, the problem begins when you hit the garage door switch, and the door starts to close but appears it cannot shut all the way.
So let’s check the safety sensors to make sure there isn’t a block between these items. These will be the electronic eyes close to the bottom of the door track on both sides. The photo-eyes have to have a clear view that allows the doorway to operate smoothly. Also, clean the electronic eyes with a cloth but gently in case the lens got dirty.
Furthermore, look whether the rollers are working correctly. If they’re too rusty, then replace them with new ones. Nonetheless, if they’re not working correctly but still look ok then add a silicone lubricant to facilitate their movement.
Finally, have a peek at your close limit switch as it informs the doorway when to stop, usually, for safety purposes. The door could stop suddenly when the wrong setting is set, so make sure you equip it correctly if you discover an issue.
The remote does not work
If you attempt to open the garage door by hitting the button on the control, but it does not make the slightest effort to open it can get frustrating.
First of all, make sure you’re not out of scope when you’re tapping on the button. If you’re too much off, then the doorway will not answer. Try opening and shutting the door with the wall switch if the remote doesn’t do its job. If the doorway reacts to the change, then there is a chance the remote is the real issue.
Consider replacing the batteries from the remote and tap on the button again. Usually, it will solve the circumstance but if it doesn’t then you will have to change the controller altogether. Lastly, make sure to inspect the antenna on the motor unit as it needs to be hanging down to permit the signal to flow.
The garage door reverses before hitting the ground
It’s possible that there’s an issue with the close-force setting if you realize your garage door is reversing before hitting the floor. The setting controls how much force you use when you’re shutting the door. As you change the close-force settings, the amount of friction the door should feel before shutting off the engine varies as well.
It means when the setting is not working right it will take a small amount of friction from the tracks to make the motor believe it’s reached the ground and stops. Matters like damaged rollers or rusty could generate more resistance, resulting in more issues. Make sure you look at the close-force setting as well as your rollers to guarantee everything works smoothly.
But if a garage door is completely shutting and then reversing to open again, then it could be due to an issue with the close-limit switch. You are going to need to make modifications to the door close-limit setting on the garage door opener until the device understands when stopping when it has reached the ground.
After the garage door gets shut, the engine continues to run
Usually, your garage door opener motor must stop working when the door gets closed. It may pose a problem to your system if you find it keeps functioning without shutting off. It’s a rare problem that started after you set up your garage door opener.
It’s an associated issue with the up-limit switch. The engine will know to close all the way and when to stop operating when you get this switch at the right distance. Consider making alterations and move the switch little by little and assess to make sure the engine stops running and the door closes.