Do you have a noisy garage door that wakes up the entire neighborhood? After much service time, the garage door can start to make a lot of strange noises.
It screams shrieks, rattles, and pops making much noise ruining your day, nighttime sleep, or waking up their neighbors sleeping, baby.
The loud noise isn’t normal and is a sign that you need garage door repair services. Thus, you’ll have to find the source of the sound.
There are many reasons garage doors make noise, but most have a simple solution either with garage door maintenance or simple lubrication.
In this post, we will go over the 7 reasons you may have a noisy garage door. Usually, your garage door installation in Clearwater, Florida makes a low noise but not loud at all.
Lubrication
The top reason your garage door makes noise is lack of lubrication. When it squeaks as you open and close it, lubrication can be the solution.
Lubricating your garage door ensure the mechanics or metal parts work smoothly. If you do any DIY maintenance or hire a garage door maintenance expert, it’s significant to lubricate all the moving parts. You can lubricate the lock mechanism, the tracks, hinges, rollers, and springs.
However, make sure to use lithium lubricant for garage doors. A lot of homeowners use a spray like WD40, but it won’t work as well as lithium.
Old worn rollers cause noisy garage door
If you hear a grinding sound when you open or close your garage door, it’s a sign that the rollers are worn out. Right off, lubricate the rollers. Many times, this will fix the sound and make it quiet again. If the grinding sound doesn’t stop, consider replacing the rollers.
Garage door repairs aren’t DIY because garage doors are heavy and cumbersome. So, hiring an expert to replace the old worn rollers works best. Remember, working under garage doors can pose safety risks, so weigh these considerations before DIY.
Tighten loose parts to reduce noisy garage door
The equipment of your garage doors, such as the rollers, hinges, nuts, bolts, and chain can loosen over the door service time. All these hardware has its signs to look for when the garage door makes noise, and the suspect is usually loose parts. Make sure to check the hardware below:
• Rollers and Hinges: Wobbling when you operate the garage door is a big sign of old worn rollers or hinges. Metal or rollers and hinges will get boisterous and worn after much usage or if they get bent. You can hear shrill squeaking or grinding if your rollers or hinges are at fault.
• Chain: If the garage door opener chain loosens, it makes a boisterous slapping sound and makes the rollers smack against the track due to jerky door movements.
• Nuts and Bolts: When the nuts and bolts become free, the garage door can vibrate or rattle when you open and close it.
Loose garage door opener chain drive
A loose chain drive can create a loud garage door. If you have a loud garage door opener and has a chain drive to open and close, it might have come free and began making that uproar. Turn the opener off, and check if the situation eases.
If the chain drive looks in good working condition, lubricate the chain drive. Often, this will quiet the sound.
Unbalanced Doors Caused By Failing Springs
Do you have an unbalanced garage door? Well, the garage door springs need replacement if they are exerting too much tension or not providing enough to counterbalance the weight of the door. Both of these situations can put added strain on the opener. An unbalanced door can cause a snapped spring or cable, or cause the opener to fail.
Be on the lookout for these unbalance door symptoms below:
• If the door looks uneven when you open or close it.
• Takes long for it to open or close.
• Doesn’t open correctly.
• Makes loud noises like banging, scraping, or squeaking.
Old worn garage door hinges
When you hear squeaking, it could be worn hinges. You’ll see gray dust, or filings, around the hinges. This is a sign they’re starting to deteriorate.
It’s an ideal time to replace the hinges to prevent squeaking. If you have handyman skills, then you can do it, or hire a garage door repair expert to handle it for you.
Bent Garage Door Tracks
Do you hear a rubbing noises when you open and close the garage door?
That is a sign of a bend in the tracks it travels on. The door can work properly, but after some time, that rubbing noise will cause a lot of damage to the door. If your door sticks while traveling, then you know you have this issue. So, inspect the tracks to check whether there any bends in them.
If you see minor bends, you probably can tap them out with a rubber mallet. If the tracks look destroyed or have big dents, replace those tracks instead.
Sure Fix Garage Door Repair
Since now you know some reasons why you have a noisy garage door, you can take the final step. If you have some handyman skills, you can tighten some of the nuts and bolts and even lubricate the metal parts.
DIY garage door repairs can risk your life if done incorrectly.
So, if you have never worked with a heavy machines or uncomfortable working with the garage door, consider hiring a garage door repair and maintenance expert for help. An expert will assess the issues and repair the problems quickly and productively.
If you want to work with a reliable and local garage door expert, call Sure Fix Garage Door Repair to resolve all the issues.
I have been hearing rubbing noises from the garage doors lately. Because of that, I started to worry if there’s a problem with our automatic garage door at home. I had no idea that this could be a sign of a bend in the tracks. Hopefully, I can find a technician for repairs here in our area. Perhaps, it would be better to ask for referrals from friends and family.